Rittal 7338.321, Монтаж, установка и эксплуатация

Страница: 62 / 86

10 Repairs
L
WARNING
Danger due to a lack of fire safety!
If the system has been taken out of service there is no fire safety. Fires breaking
out can cause severe injuries and significant property damage.
● Keep functioning and suitable reserve extinguishing equipment on hand (e.g.
suitable fire extinguishers).
● Do not shut down the system longer than necessary.
● Place the system in service immediately after conclusion of the inspection and
maintenance tasks.
The owner performs regular visual inspections and functional checks described for
the owner.
Maintenance of and repairs to the system are performed by a trained Authorized
Distributor.
An authorized specialist company for the maintenance and troubleshooting tasks is
a company whose employees have been trained by the manufacturer of the system.
As a general rule, this is an employee of the installation company.
The manufacturer accepts no liability for improper handling and insufficient or non-
performed regular checks and maintenance.
10.1 Regular checks by the owner
Daily checks (Owner)
● The system must be in a failure-free state. This is to be checked using the dis-
plays (display and LEDs) of the superordinate system.
If the system is connected to a CMC III, the control can also be done via the
website or the superordinate control system.
● Failures present are to be recorded and rectification is to be initiated.
Monthly checks (Owner)
● The discharge nozzle must not exhibit any external damage and must be free
from contamination and spray obstacles.
Repairs
Operating Instructions / DET-AC III Slave / 916007 / 05-2016 / en_US 62