Rittal 4055.710, Руководство по эксплуатации

Страница: 8 / 20

7 Commissioning
EN
8 We reserve the right to make technical modifications. Rittal stationary busbar cutting unit CW 120-S
(8) set the height of the retainers that are fixed at the required position with the
locking levers (7).
A line laser integrated in the cutter bar (12) simplifies the exact positioning of the
busbar. The four holes (11) in the frame can be used for the fixed mounting of
the unit on a table or workshop trolley.
Fig. 2: Dimensions
7 Commissioning
You receive a fully assembled "stationary busbar cutting unit" as well as detailed
operating instructions.

On receiving the goods, check them for possible transport damage and the
delivery for completeness.

In the event of problems, contact the manufacturer or your vendor without de-
lay.

In any case, read the complete operating instructions as well as all supplied
documents before commissioning.

Wear your personal protective equipment, in particular gloves and safety work
shoes, also for the transport and installation of the unit (see section 2.4 "Per-
sonal protective equipment").

Ensure that the surface on which the unit is placed is flat and sufficiently stable.

Inspect the hydraulic hose and the control cable for crushing and any other
damage. Never use damaged hydraulic supply lines or electrical supply cables.

Inspect the mains cable and plug of the hydraulic pump for damage. Do not
use the electro-hydraulic pump should there be any damage!

Place the unit secure and stable to ensure a safe positioning of the unit.
Caution!
When recommissioning the unit, there is the risk that incor-
rect storage or missing corrosion protection can block unit
components and so cause dangers.

Before recommissioning, ensure the smooth running of all
components and the correct function of all safety equip-
ment (see section 10 "Maintenance and inspection").
Note:
The hydraulic hose and the electrical control cable for the unit are
supplied as set in a stable safety protection tube. As supplied, the
hydraulic hose is filled with hydraulic oil HLP46.