Ritron AIERIT27-150, Руководство пользователя

Страница: 28 / 61

Section 4
Operation 24
4.7
ptions
ct operation as follows:
P
ature enabled the Loudmouth
™
will sound a short tone prior to each broadcast to notify listeners that
a page is forthcoming.
ne S
Set the Lou operation to set the correct audio output level from the audio
4.8
How to Minimize Feedback
F he radio being used
to access the L er. Although the
Loudmouth
™
is not intended to be used in the same area as the calling radio, steps can be taken to minimize the
R me
o not set the Loudmouth
™
volume any high than is necessary to cover the intended area.
U
ntly,
e can be reduced.
peaker
y distance increases if the volume is turned up and decreases if the volume is
rned down.
M
ou do not want the speaker pointing directly into the microphone. Using your hand to shield the microphone
Loudmouth
™
O
Certain Loudmouth
™
options affe
re-Announce Tone
With this fe
O peaker / Two Speakers
dmouth
™
for one or two speaker
amplifier.
eedback is the result of the Loudmouth
™
speaker audio getting back into the microphone of t
oudmouth
™
. This is a problem with the calling radio, not the Loudmouth
™
receiv
feedback effect.
educe Loudmouth
™
speaker volu
D
se multiple speakers
The use of multiple speakers means you don’t have to cover as large an area with each speaker, conseque
speaker volum
Maintain distance between the calling radio and the Loudmouth
™
s
In general, the calling radio should be at least 50 feet away from the speaker when the Loudmouth
™
is set for
50% volume. The necessar
tu
ake sure the radio microphone is turned away from the speaker
Y
can also reduce feedback.
Use a noise canceling microphone
Equip your calling radio with an optional noise-canceling microphone.
Record and Play feature eliminates feedback
The Record and Play feature completely eliminates feedback by recording your
message and playing it back immediately after you have finished sending it to the
Loudmouth
™
receiver. See page 18 to enable the Record and Play operation.
The calling radio is not transmitting while the message is broadcast, so speaker
audio cannot get into the calling radio microphone.