4
1. General information
1.1. The boilers of the UNIVERSAL RG series are a part of the heating system and are produced in
accordance with EN 303-5: 2012 TC 4931-007-82749029-2007, TC 4931-008-82749029-2007.
1.2. The boiler works on solid fuel (coal, firewood, sawdust, pellets, combustible waste, etc.) and does not
require the constant staff presence. Manual fuel loading is performed 2–4 times a day, as necessary. The boiler
is economical in its operation; its efficiency is up to 80%. Efficiency can be increased by installing an
economizer.
1.3. When installing multiple boilers (energy module), the total heat output increases proportionally. Any
number of boilers is allowed for installation into modules.
1.4. When installing additional equipment, you can get hot water for household and domestic needs.
1.5. To simplify maintenance and repair, the boiler has a detachable construction made of two parts: a heat
exchanger and an ashpit. Cleaning the boiler from the ash is made without stopping it.
1.6. In standard package, the boiler comes with a heat-insulating casing. Thermal insulation of the boiler
and pipelines significantly reduces heat loss in the heating system and protects the staff from the effects of
elevated temperature of the heated parts. Thermal insulation of pipelines is made of affordable thermal
insulating materials (mineral wool, etc.).
1.7. As a rule, the boiler is installed directly in the vicinity of the heated facility or directly on the facility
(when a height of the boiler plant is at least 2.8 m). When installing the boiler outside the insulated room, the
insulation of the boiler, as well as of all pipelines, is required in case of emergency shutdown in order to avoid
unnecessary heat loss and rapid freezing of the system.
1.8. Maintenance, proper operation and preventive cleaning of the boiler, the gas flue, the chimney and the
heating system is carried out by the owner of the boiler.
1.9. CO emission is less than 0.7%.
1.10. The boilers of the UNIVERSAL RG series are not subject to registration in supervisory authorities
when operating in low-pressure heating systems with a heat exchange liquid temperature less than 100 °C.
2. Purpose
2.1. The boilers of the UNIVERSAL RG series are intended for heating and hot water supply of residential,
office and production facilities, buildings, shops, etc.
3. Completeness
3.1. The standard package includes:
boiler – 1 pc;
safety devices (thermometer – 1 pc, monometer – 1 pc, safety valve – 1 pc, automatic air vent – 1 pc);
installation and operation instruction;
product passport with warranty obligations – 1 pc;
the platform, the scoop, and the scraper are not included into the standard package and are completed
separately at the client’s request.
4. Technical specification
4.1. Heat transfer liquid is water and special non-freezing liquids.
Temperature condition of the heat transfer liquid:
Maximum – 75
С – 65
С (flow – return flow).
Optimum – 75
С – 60
С.
Содержание UNIVERSAL RG Series
