background image

NOTICE TO USER

Thank you for purchasing a Rite‑Hite product
The SpanGuard Mesh Safety Barrier is designed to 

separate and define work areas, walkways and other 

areas that might require protection
Capacity: Designed to stop up to 5,000 lbs (2273 kg) 

Opening width: 30ft [9150mm] to 60ft [18300mm].

The English version of this manual shall prevail over any 

error in, or conflicting interpretation of, any translations.
Rite‑Hite reserves the right to substitute and/or modify 

parts and drawings. If separate prints are included with the 

unit, they supersede those contained in the manual 
For best results, have this product serviced by an 

authorized Rite‑Hite representative
A Planned Maintenance Program (PMP), customized to 

your specific operation is available and recommended. 

For a PMP, contact your local Rite‑Hite representative 

or Rite‑Hite technical support at (U.S.) 414‑973‑3625 or 

888‑456‑3625 

(S.A.) +55 21 99616 4421

,  

(E.U.) +49‑5693 98700.

The Rite‑Hite products in this manual are covered by one or more of the 

following U.S. patents: 7207370, 7832451, 7775252, 6279276, 8490668, 

7237591, 8087443, 8826963, and may be covered by additional pending 

US and foreign patent applications

Manufactured by Rite‑Hite Engineered Solutions Group, Inc.

SAFETY
Safety Identifications

 DANGER

Indicates a hazardous situation which, if not 

avoided, will result in death or serious injury.
Indique une situation dangereuse qui, si elle n’est 

pas évitée, peut entraîner la mort ou de graves 

blessures.

 WARNING / AVERTISSEMENT

Indicates a hazardous situation which, if not 

avoided, 

could result in death or serious injury

.

Indique une situation dangereuse qui, si elle n’est 

pas évitée, 

peut entraîner la mort ou des 

blessures graves

.

 CAUTION / ATTENTION

Indicates a hazardous situation which, if not 

avoided, 

could result in minor or moderate injury

.

Indique une situation dangereuse qui, si elle n’est 

pas évitée, 

peut entraîner des blessures légères à 

modérées.

NOTICE

Indicates a situation which can cause damage to the 

equipment, personal property and/or the environment, 

or cause the equipment to operate improperly

NOTE:

A note is used to inform you of important 

installation, operation, or maintenance information

SpanGuard

®

 Mesh Safety Barrier 

Installation/Service/Owner's Manual

 Rite‑Hite

®

2 Publication: 

AMEN00136 2019-11-22

Содержание SpanGuard

















Отзывы: