RITE-HITE RHH-5000, Руководство пользователя

Страница: 8 / 40

NORMAL OPERATION
1. Activate the leveler by pushing and holding the RAISE button to
raise the platform. While pressing the RAISE button, if equipped,
push the LIP EXTEND button to fully extend the lip when the lip
has cleared trailer bed. See figure 3.
2. When lip is fully extended, release RAISE and if equipped,
LIP EXTEND buttons. The leveler will automatically lower onto
the truck/trailer bed. See figure 4.
NOTES:
a. Be sure the lip is in full contact with the truck/trailer bed before
loading or unloading truck/trailer.
3. See Storing Leveler .
NOTES:
a. Levelers without Automatic Return to Dock (ARTD) If the
truck/trailer departs, the leveler will move to its lowest position
and the lip will fall to the pendant position inside the dock
bumpers. See Storing Leveler.
b. Levelers with Automatic Return to Dock (ARTD) If the lip is
on the truck/trailer and the truck departs, the leveler will move to
its lowest position and the lip will begin to lower. As the lip drops
toward the pendant position, the ARTD system automatically
returns the leveler to the stored position without operator
assistance.
END LOADING OPERATION
NOTES:
On units without a Safe-T-Lip
®
, end load at dock level and above
can be handled with the leveler in its stored position.
1. For units with Safe-T-Lip
®
, or all below dock end loads, activate
the leveler by pushing and holding the RAISE button until the
lip clears the lip supports. While pressing the RAISE button, if
equipped, push the LIP EXTEND button briefly to extend the lip
beyond the lip supports. See figure 5.
2. When lip extends about 2 inches, release RAISE and if equipped,
LIP EXTEND buttons. The leveler will lower to the below dock
position with the lip positioned between the face of the loading
dock and the truck/trailer bed. See figure 6.
OPERATION
FIGURE 3 - POWERED DOCK LEVELER
FIGURE 4 - NORMAL OPERATION
FIGURE 6 - END LOAD OPERATION
FIGURE 5 - END LOAD OPERATION - LIP POSITION
RHH-5000 High Capacity Dock Leveler
Owner’s Manual
Rite-Hite
®
8 Publication: AMEN00206 2020-02-04