manualshive.com logo in svg

RITE-HITE Genisys HL-900, Руководство пользователя

Поделиться
Скачать
RITE-HITE Genisys HL-900 Скачать руководство пользователя страница 2

Genisys™ HL-900 Dock Leveler 

Owner's Manual

 Rite-Hite

®

2

 Publication: 

AMEN00160 2021‑08‑17

NOTICE TO USER

Thank you for purchasing a Rite-Hite product

The HL-900 Dock Leveler is designed to provide a smooth 

transition for forklifts from warehouse floor to trailer beds.

Read and understand contents of this manual prior to 
installation or operation of this equipment 

The English version of this manual shall prevail over any 

error in, or conflicting interpretation of, any translations.

Rite-Hite reserves the right to substitute and/or modify 
parts and drawings If separate prints are included with  
the unit, they supersede those contained in the manual 

For best results, have this product serviced by an 
authorized Rite-Hite representative

A Planned Maintenance Program (PMP), customized to 

your specific operation is available and recommended. 

For a PMP, contact your local Rite-Hite representative 
or Rite-Hite technical support at (US) 888-456-3625, 
(SA) +55 21 99616 4421, (EU) +49-5693 98700

The Rite-Hite

®

 products in this manual are covered by one or more 

of the following US patents: 6065172, 6070283, 6085375, 6092970, 
6106212, 6116839, 6190109, 6311352, 6322310, 6360394, 6368043, 
6488464, 6524053, 6726432, 6773221, 6832403, 7032267, 7062814, 
7213285, 7216391, 7363670, 7380305, 7503089, 7533431, 7546655, 
7584517, 7681271, 7823239, 7841823, 7877831, 7914042, 8006811, 
8065770, 8141189, 8191194, 8286757, 8287223, 8303235, 8307956, 
8443474, 8464384, 8464846, 8465245, 8497761, 8499897, 8544130, 
8547234, 8590087, 8590673, 8616826, 8657551, 8662535, 8678736, 
8690087, 8905198, 9010501, 9096170, 9096397, 9126775, 9139384, 
9145273, 9150367, 9174811, 9227799, 9230419, 979003, 9481531, 
9542824, 9564056, 9564072, 9586771, 9607496, 9633537, 9672713, 
9694996, 9738467, 9771225, 9776511, 9777529, D775537, D778184 
and may be covered by additional pending US and foreign patent 
applications

Rite-Hite

®

, Genisys™, ThinMan™, Safe-T-Lip

®

, Hydrachek

®

, 

Wheel-Lok™, Dok-Lok

®

, Dual-Dok

®

, Safe-T-Strut™, Dok-Commander

®

, 

Jumbo™, Hydra-Rite™, Safe-T-Gate

®

, Rite-Vu™ Hazard Recognition 

and Communication System, and Smooth Transition Dok System™, are 
trademarks of Rite-Hite

®

Manufactured by Rite-Hite Products Corporation

Содержание Genisys HL-900









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды