Dok‑Commander
®
Installation/Service/Owner's Manual
Rite‑Hite
®
2 Publication:
AMEN00070 2020-01-30
NOTICE TO USER
Thank you for purchasing a Rite-Hite product
The Dok-Commander system integrates multiple loading
dock control components at each dock position for a total
dock safety system
The English version of this manual shall prevail over any
error in, or conflicting interpretation of, any translations.
Rite-Hite reserves the right to substitute and/or modify
parts and drawings If separate prints are included with
the unit, they supersede those contained in the manual
For best results, have this product serviced by an
authorized Rite-Hite representative
A Planned Maintenance Program (PMP), customized to
your specific operation is available and recommended.
For a PMP, contact your local Rite-Hite representative
or Rite-Hite technical support at (US) 1-563-589-2722,
(SA) +55 21 99616 4421, (EU) +49-5693 98700
The Rite-Hite
®
products in this manual are covered by one or more
of the following US patents: 6065172, 6070283, 6085375, 6092970,
6106212, 6116839, 6190109, 6311352, 6322310, 6360394, 6368043,
6488464, 6524053, 6726432, 6773221, 6832403, 7032267, 7062814,
7213285, 7216391, 7363670, 7380305, 7503089, 7533431, 7546655,
7584517, 7681271, 7823239, 7841823, 7877831, 7914042, 8006811,
8065770, 8141189, 8191194, 8286757, 8287223, 8303235, 8307956,
8443474, 8464384, 8464846, 8465245, 8497761, 8499897, 8544130,
8547234, 8590087, 8590673, 8616826, 8657551, 8662535, 8678736,
8690087, 8905198, 9010501, 9096170, 9096397, 9126775, 9139384,
9145273, 9150367, 9174811, 9227799, 9230419 979003, 9481531,
9542824, 9564056, 9564072, 9586771, 9607496, 9633537, 9672713,
9694996, 9738467, 9771225, 9776511, 9777529, D775537, D778184
and may be covered by additional pending US and foreign patent
applications
Rite-Hite
®
, THINMAN™, SAFE-T-LIP
®
, HYDRACHEK
®
, WHEEL-LOK™,
DOK-LOK
®
, DUAL-DOK
®
, SAFE-T-STRUT™, Dok-Commander
®
,
JUMBO™, HYDRA-RITE™, SAFE-T-GATE
®
, Rite-Vu™ LIGHT
COMMUNICATION SYSTEM and SMOOTH TRANSITION DOK
SYSTEM™, are trademarks of Rite-Hite
®
Manufactured by Rite-Hite Products Corporation
FCC Compliance
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense
NOTE:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment
