Riso SE 9380, Руководство пользователя

Страница: 51 / 268

Basic Operations
Printing from a Computer Data [Direct Print] [USB Job List]
49
Auto Process and Stop Timing
Auto Process is a combined automated steps of receiving data from the computer, making a master, and printing.
To activate “Process”, open the printer properties dialog box on the computer and select “Auto-process”. (A proof
copy will not be printed.)
During each process, in order to adjust settings or to change paper, you can stop the operation.
To temporarily halt an operation during the creation of a master or during print process, select one of the following
three options for “Process” in the printer properties dialog box.
• Pause before “Master”
Halts the operation before master-making:
To change settings, to change paper and to change Print Drum (Cylinder)
• Pause before “Print”
Halts the operation before printing:
To print proof, to adjust Ink density, to adjust positioning and to change printing speed
• Auto-process “OFF”
Stops twice; before making a master, and again before printing.
Note:
• The timing for stopping printing can also be changed from the display of the machine.
) p.57
Receive data
from computer
Stop before
making a master
Master Making Stop before
printing
Printing
Auto-process “ON” --- ---
Pause before
“Master” Yes ---
Pause before “Print” --- Yes
Auto-process “OFF” Yes Yes