Riso SE 9380, Руководство пользователя

Страница: 14 / 268

Before Starting to Use
Safety Guide - Handling and Operation
12
Safety Guide - Handling and Operation
This section describes the precautions to be observed when handling the machine. Read this section before operat-
ing the machine.
Operation Environment
Important!:
• Operate the machine under the following appropriate environment conditions.
Temperature range: 15
°
C to 30
°
C (59
°
F to 86
°
F)
Humidity range: 40% to 70% (noncondensing)
Machine Handling
A
WARNING:
• Do not place water containers or metallic objects on the machine. Fire or electric shock may occur if water or metal-
lic objects fall into the machine.
• Do not use combustible spray and flammable solvent near the machine.
If sprayed gas and flammable solvent contact electronic components inside the machine, fire or electric shock
might occur.
• Do not insert any metallic material or flammable substance into the machine through any opening. This can result
in fire or electric shock.
• Do not remove machine covers. Exposing internal parts may result in electric shock.
• Do not disassemble or rebuild the machine by yourself. This can result in fire or electric shock.
• If the machine emits excessive heat, smoke or foul odor, immediately turn off the POWER, unplug the power cord
and contact your dealer (or authorized service representative). Failure to do so can result in fire or electric shock.
• If something drops inside the machine, immediately turn off the POWER, unplug the power cord and contact your
dealer (or authorized service representative). Failure to do so can result in fire or electric shock.
• Never stick your hands or fingers in the openings of the machine during operation.
• Keep loose clothing or long hair away from moving parts to avoid becoming entangled.
• Do not place heavy objects on the machine. The objects might fall and cause injury.
• Contact your dealer (or authorized service representative) before moving the machine.
B
Caution:
• Never insert fingers, etc. into the openings around Paper Feed Tray and Paper Receiving Tray. This can result in injury.
• Do not touch the moving parts of the machine. This may cause injury.
• When you insert a hand inside the machine to remove paper, etc., be careful not to touch protruding objects or the
edges of the plates. This may cause injury.
• Be careful not to touch the areas around the Print Drum (Cylinder) or inside the machine when the Print Drum (Cyl-
inder) is removed, as Ink may be present on those areas.
When Ink has stuck to your hands, etc., wash it off with detergent as soon as possible.
• The tips of the paper separation hook and master removal hook are sharp. When you insert a hand inside the
machine to remove paper, be careful not to touch the paper separation hook or master removal hook. This may
cause injury.
• Do not open any covers or move the machine during operation.
• Unplug the power cord, if you do not use the machine for a long time.
• The machine has precision parts and driving parts inside. Do not handle the machine in other ways than described
in this manual.
• Do not subject the machine to physical shock.
• Do not stand the Print Drum (Cylinder) vertically. Doing so may pollute the floor, etc.
• Allow plenty of ventilation during printing.
Important!:
• Do not unplug the power cord or turn off the power during operation.
• Be sure to open and close all machine covers gently.