Riso SE 9380, Руководство пользователя

Страница: 133 / 268

Advanced Features
Automatic Sorting Into Groups [Program]
131
How to Program Print
There are two ways to print in sets using “Program” printing feature.
• Program, then print (without saving the settings) ) p.132
• Retrieve a saved program, then print (when program is registered) ) p.137
Choose from the following actions on the Print Basic Screen.
Touch a button to proceed.
[Renew Page] : Creates a master from the last Master-Making data.
[Next Page] or [Go to Next] : Stops current print job, skips to the next original, set or group.
[Cancel Job] : Cancels execution of the Program.
Note:
• The optional Job Separator is useful for Programed Printing.
The Job Separator releases a piece of tape after each set or original document, thereby automatically separating
sets or groups. It eliminates the need to manually remove a stack of sheets or insert a marker between sets.
Remember to activate “Job Separation” in the Functions Screen when printing with the Job Separator.
You must remove each stack from the Paper Receiving Tray, or insert a marker during the pause if not using the
Job Separator.
Black
Basic Selections Functions Admin.
I d l e
Renew Page
I n f o
Ready to Print Ready to Print
Print Position
A4
D-Feed D-Feed
Check Check
0.0 mm
0.0 mm
S i l e n t
H i g h S p e e d
Renew Page
Go to Next
Cancel Job
003G 003G 3- - - -
Program-A Program-A
Paper