Riso SE 9380, Руководство пользователя

Страница: 107 / 268

Functions for Printing
Paper Feed/Output Settings for Special Paper and Printing Types [Jump Wing Control] [Special Paper Ctrl]
105
Paper Feed/Output Settings for Special
Paper and Printing Types
[Jump Wing Control] [Special Paper Ctrl]
Paper feed and output settings can be adjusted when using special paper or uneven print finishes.
‹
Jump Wing Control
The following steps retrieves pre-configured custom settings for
the Paper Jumping Wing. Use this feature to eject certain printing
paper that is hard to eject with automatically adjusted normal
Paper Jumping Wing setting.
Important!:
• “Jump Wing Control” feature is not available unless pre-config-
ured.
• Only one setting can be pre-configured.
• To pre-configure or to change settings, please contact your dealer (or authorized service representative).
Note:
• The Paper Jumping Wing is a device which helps eject printed paper onto the Auto-control Stacking Tray or the
Paper Receiving Tray.
It automatically adjusts according to the position of the Paper Feed Pressure Adjustment Lever (NORMAL or
CARD).
‹
Special Paper Ctrl
You can save settings for easy retrieval next time. The “Special Paper Ctrl” menu contains the following options:
Paper Feed Adj.
Adjust Paper Feed Tray position and paper-feed amount to suit special paper characteristics.
For adjustment methods, please contact your dealer (or authorized service representative).
Paper Eject Adj
Some types of original image/paper may be printed with an uneven or blurred finish due to air blow or separation
fan settings. This option can be used to change air blow and separation fan settings.
For adjustment methods, please contact your dealer (or authorized service representative).
‹
Receive Tray (when using the optional Auto-control Stacking Tray)
The positions of the Receiving Tray Paper Guides/Stopper on the Auto-control Stacking Tray are automatically
adjusted according to the paper size. Detailed adjustments to these positions can also be made using the display
buttons where appropriate.
For information on adjusting the Receiving Tray Paper Guides/Stopper, see “Adjusting the Auto-control Stacking
Tray” (
) p.112).
Important!:
• In cases where the Receiving Tray Paper Guides/Stopper are not raised, adjustments cannot be made to the
Auto-control Stacking Tray.
Paper Jumping Wing