Riso SE 9380, Руководство пользователя

Страница: 101 / 268

Functions for Printing
Adjusting the Print Density [Print Density Adjustment]
99
Adjusting the Print Density
[Print Density Adjustment]
You can select the print density from five levels.
You can adjust the print density while printing is in progress.
Important!:
• “Print Density” is not available when “Ink Saving” is selected.
) p.70
Note:
• The default print density can be set on the Admin. Screen.
The factory default is set at level 3 (Standard).
) p.167
• When [ECO mode] is set, the default print density is “1”.
The print density may be adjusted while in ECO mode.
) p.167 [Print Speed]
) p.167 [Print Density]
Press the or key to adjust the
print density.
1)
Print Density Adjustment Indicator
Shows the current setting of the print density.
2)
Key
Increases the print density incrementally.
3)
Key
Decreases the print density incrementally.