Riso MZ770, Руководство пользователя

Страница: 44 / 307

Basic Operations
2-Colour Printing with 2 Originals 41
3
Load paper.
See
)
p.33 for details on how to load the paper.
4
Set up the Paper Receiving Tray.
See
)
p.35 for details on how to set up the Paper
Receiving Tray.
5
Place the original for Drum 1.
Place the original on the Platen Glass or in the
optional ADF (Auto Document Feeder) unit.
‹
When placing on the Platen Glass
Place the original face down on Platen Glass.
Align centre on the top edge, and close Platen
Cover.
Magazines, books, scrap books, etc. should be
placed on Platen Glass.
Tip:
Using the Gauge Cover
The Gauge Cover allows you to align original
images precisely on the Platen Glass even if
they are not squared on the sheet. Shift the
original sheet along the grid lines printed on the
cover, touching it through the openings on the
cover.
‹
Setting the Auto Document Feeder
(Option)
Match the original guides to the width of the
original, then push all the way to the back.
In the Auto Document Feeder, the two originals
can be set for drum 1 and drum 2 at once. In this
case, set the original for drum 1 to the front side,
and the original for drum 2 to the back side.
How to Set the Original
When using the Auto Document Feeder AF-VI,
set the original face down.
When using the Auto Document Feeder DX-1,
the side of the original that is read can be spec-
ified. For details about the settings, refer to
“Selecting Scanning Sides When Using the
Auto Document Feeder DX-1” (
)
p.164)
Gauge Cover
Grasp here
and lift up the
gauge cover
Place the original
face-down