Riso MZ770 Скачать руководство пользователя страница 14

Страница: 14 / 307

Before Starting to Use

Safety Guide - Handling and Operation

Safety Guide - Handling and Operation

This section describes the precautions to be observed when handling the machine. Read this section before operat-
ing the machine.

Operation Environment

Important!:

• Operate the machine under the following appropriate environment conditions.

Temperature range: 15

C to 30

Humidity range: 40% to 70% (noncondensing)

Machine Handling

WARNING:

• Do not place water containers or metallic objects on the machine. Fire or electric shock may occur if water or metal-

lic objects fall into the machine.

• Do not insert any metallic material or flammable substance into the machine through any opening. This can result

in fire or electric shock.

• Do not remove machine covers. Exposing internal parts may result in electric shock.

• Do not disassemble or rebuild the machine by yourself. This can result in fire or electric shock.

• If the machine emits excessive heat, smoke or foul odor, immediately turn off the POWER, unplug the power cord

and contact your service representative. Failure to do so can result in fire or electric shock.

• If something drops inside the machine, immediately turn off the POWER, unplug the power cord and contact your

service representative. Failure to do so can result in fire or electric shock.

• Never stick your hands or fingers in the openings of the machine during operation.

• Keep loose clothing or long hair away from moving parts to avoid becoming entangled.

• Do not place heavy objects on the machine. The objects might fall and cause injury.

• Contact your service representative before moving the machine.

Caution:

• Do not open any covers or move the machine during operation.

• Unplug the power cord, if you do not use the machine for a long time.

• The machine has precision parts and driving parts inside. Do not handle the machine in other ways than described

in this manual.

• Do not apply any shock to the machine.

Important!:

• Do not unplug the power cord or turn off the power during operation.

• Be sure to open and close all machine covers gently.

Содержание MZ770




















































































































































































































































































































Результаты поиска

Содержание MZ770

Отзывы:

Бренды по названию

Популярные бренды

Riso MZ770, Руководство пользователя

Результаты поиска

Содержание MZ770

Отзывы:

Бренды по названию

Популярные бренды