Riso MZ770, Руководство пользователя

Страница: 111 / 307

Functions for Master-Making
Checking the Print Image Prior to Making Master [Preview] 108
Checking the Print Image Prior to Making
Master
[Preview]
You can check what the actual master will look like by previewing an image of the scanned original or an image of
data sent from a computer. This function is handy for making sure that the “Easy 2Colour” separation was successful,
and for checking the layout or final image of a Multi-Up job.
The operation and display timing differ depending upon the mode.
Note:
• Preview shows an image oriented towards output after printing.
• It shows the scanned original as-is. A margin is required when actually printing. Check to make sure that the mar-
gins are sufficient.
• If you are 2-Colour printing, a 2-Colour preview will be displayed after the original has been scanned on Drum 1
and Drum 2.
• Even if a single original has been separated using the “Easy 2Colour” function, each of the separated results is dis-
played.
• In “Direct Print” operation, [Preview] will be displayed on the Master Making Basic Screen when data is received
from the computer.
)
p.68
• When in Link mode (when a linked printer (sold separately) is connected), the original image after scanning and
prior to output from the linked printer is previewed.
Mode name
(original type) When set When to display If “Auto Processing” is ON
Printing from the Original
Document When setting functions
related to Master Making
(settings from Functions) After Scanning the
Original Scans the original, then
temporarily stops to display
preview.
Scan Mode When setting functions
(master making functions)
related to Scanning (setting
from Functions) After Scanning the
Original When in scan mode, an
original is scanned and then
saved, so there is no “Auto
Process” operation.
However, if multiple originals
are placed in an ADF unit,
you can touch
[Continue]
after reviewing the preview
to start the scan of the next
original.
Printing Original Data
from a Computer Stopping the print job prior to
making a master (Semi-
Auto(Print)/Auto Process
OFF), after the machine has
received the original data Displays when touched A preview is not shown if
data is sent from the printer
driver with “Auto Print” “ON”.
Retrieving Stored Data
and Printing When retrieving stored data
(set on the Storage Basic
Screen) Displays when touched If you touch [Preview] , it
displays immediately.
Touch
[Continue] to make a
master/print with “Auto
Process”.