Riso MZ1070, Техническое руководство, Страница: 56 / 150

[ 15-22 ] MZ870 / MZ890 / MZ1070 / MZ1090 (Revision 0.9)
TEST MODE
No. Sensor/switch Detecting condition
Print drum
changeover
0400 Master-positioning sensor Light received (master detected) –
0401 Master detection sensor Light path blocked (master detected) –
0402
Master end sensor Light path blocked (master end mark detected)
–
0403
Cutter HP SW Switch OFF (cutter at home position)
–
0406
TPH pressure sensor Light path blocked (blocked by shield plate)
–
0407
Master-making-unit top cover safety switch Switch ON (master making unit top cover closed)
–
0410 Master-making-unit releasing button Switch ON (button depressed) –
0411 Master-making Unit Position Sensor Light path blocked (blocked by shield plate) B
0412 Master-making Unit Pull-out Position Sensor Light path blocked (blocked by shield plate) –
0413
Master-making Unit Drawer Cover Safety
Switch
Switch ON (master making unit cover closed)
* The rear cover safety SW must be ON during this
procedure.
–
0420 Master-disposal Jam Sensor Light received (master detected) B
0421 Master-compression HP Sensor
Light path blocked (master compression plate at home
position)
B
0423 Master-disposal box safety SW
Switch ON (master disposal box set in machine)
* For inspections of the first print drum side, the
rear cover safety switch and the master-making unit
drawer cover safety switch must be ON during this
procedure.
* For inspections of the second print drum side, the
rear cover safety switch, the master-making unit
drawer cover safety switch, and the first master
disposal box safety switch must be ON during this
procedure.
B
0424
Master disposal box set sensor Light path blocked (disposal bix is set in place)
B
0425
Master-compression motor FG sensor Light path blocked (blocked by shield plate)
B
0426 Master-removal motor FG sensor Light path blocked (blocked by shield plate) B
No. Motor/solenoid Remarks
Print drum
changeover
0460
Thermal-pressure motor (CW) Rotates clockwise (CW).
–
0461
Thermal-pressure motor (CCW) Rotates counterclockwise (CCW). –
0462 Write pulse motor (CW) Rotates clockwise (master feeding). –
0463 Write pulse motor (CCW) Rotates counterclockwise (master returning). –
0464 Load pulse motor (CW) Rotates clockwise (master feeding). –
0465
Load Pulse Motor CCW (Reverse) Rotates counterclockwise (master returning).
–
0466 Write pulse motor + Load pulse motor (CW)
Rotate both write pulse motor and load pulse motor
in master-feed direction.
–
0467 Master-making-unit release button LED
The LED of the master-making unit release button
illuminates.
–
0468 Master Stocker Fan ON & OFF <Stop Key = OFF> –
0470 Master removal motor (CW) Rotates to feed master into the master disposal box. B
No. Unit check
Print drum
changeover
0480
Cutter motor 1 cycle motion
–
Cuts the master.
0481
Thermal pressure motor action (TPH down)
–
Moves the TPH to the pressure application position.
0482
Thermal pressure motor action (TPH up)
–
Moves the thermal print head to the pressure-releasing position (i.e., moves it out of the way).
0483
Master-making Unit Positioning
B
Moves master-making unit to the master-making position on the first or second print drum side.
0484
Master-making Unit Pull-Out Position
–
Moves the master-making unit to the pull-out position.
5. Master-making/Master-disposal Test Mode