Riso MH 9350 Скачать руководство пользователя страница 36

Страница: 36 / 218

Chapter 2 Basic Operations

When using the glass platen

Open the platen cover.

Place an original on the glass
platen.

Place the original with the scanning side facing
down and align the center of the original with
the [

] mark.

Close the platen cover.

When using the auto document
feeder

Place originals on the auto docu-
ment feeder.

Place the originals with the scanning side fac-
ing up.

Adjust the ADF original guides to

the width of the original.

When a gauge cover is attached on
the glass platen, place the original
under the gauge cover.
You can lift the gauge cover from
the lower right.

Close the platen cover gently.
Forcefully closing the platen
cover will cause damage to the
glass platen or original scanning
errors.

Gauge cover

For the auto document feeder, the
size and the number of originals
to be placed are limited.
(

“Originals”)

This machine identifies the origi-
nal size by recognizing the posi-
tions of the ADF original guides.
If the ADF original guides do not
fit tightly to the original, the origi-
nal size cannot be identified cor-
rectly.

Содержание MH 9350



























































































































































































































Результаты поиска

Содержание MH 9350

Отзывы:

Похожие инструкции для MH 9350

Бренды по названию

Популярные бренды

Riso MH 9350, Руководство пользователя

Результаты поиска

Содержание MH 9350

Отзывы:

Похожие инструкции для MH 9350

Бренды по названию

Популярные бренды