Riso GOCCOPRO 100, Руководство пользователя

Страница: 70 / 94

68
When the Image is Not Correctly Produced
onto the Screen
Problem Checkpoint Action
The data tran s ferred
onto the s creen i s di s -
placed or it s edge i s
mi ss ing.
Doe s the s ize of the original data cre-
ated on the application s oftware
exceed the image area?
When an imaged s creen i s prod u ced, margin s are
added on the Top and End s ide s of the original data.
In addition, any part o u t s ide the image area will not
be tran s ferred onto the s creen.
Check the frame type and the s ize of the original
data.
Character s are not tran s -
ferred correctly onto the
s creen (the font of the
tran s ferred character s
differ s from the original).
I s the o u tp u t of the application s oft-
ware s et to "U s e Printer Font s "?
In the application, s pecify other than "U s e Printer
Font s ".
Graphic s are not tran s -
ferred correctly onto the
s creen.
Doe s the printer driver su pport the
machine?
When original data i s edited after a printer driver
that doe s not su pport the machine i s s elected,
graphic s may not be tran s ferred correctly onto the
s creen.
After s electing the driver su pporting the machine,
edit the original data and prod u ce an imaged s creen
again.
Image s are deformed/
red u ced in s ize.
Doe s the printer driver su pport the
machine?
Be su re not to prod u ce an imaged s creen after
s electing a printer driver that doe s not su pport the
machine.
The original s ize regi s -
tered in the [Original s ize
entry] dialog box i s not
s hown in the li s t.
Did yo u click [Add] in the [Original s ize]
tab after entering the s ize?
Click [Clo s e] in the [Original s ize entry] dialog box to
clo s e the dialog box, and then click [OK] (or [Apply])
in the [Original s ize] tab.
"Registering Original Size" on page 72
Ha s an original s ize with the s ame
name already been regi s tered?
Regi s ter the original s ize with a different s ize name.
Val u e s cannot be
entered in [C us tom] of
the [Original s ize] tab.
Did yo u try to enter a val u e that
exceed s the s etting range?
The original s ize s that can be entered are:
0. 3 9" to 11.69" / 10 mm to 297 mm in width and
0. 3 9" to 3 1.50" / 10 mm to 800 mm in length. Enter a
val u e within the range.