Riso GOCCOPRO 100, Руководство пользователя

Страница: 67 / 94

5
Troubleshooting
65
Troubleshooting (Tips)
When fail u re i s sus pected, check the following point s before contacting dealer.
Actions to Be Taken on the Main Unit
Problem Cause Action
The machine doe s not
s tart when the power
s witch i s t u rned on.
Power may be di s connected.
• Check if the power cable pl u g i s firmly in s erted
into an electrical o u tlet.
• Check if the power cable i s s ec u rely connected
to the machine.
• Check the power breaker.
Altho u gh a s creen i s
ejected, no image i s tran s -
ferred onto the s creen.
The s ide of the Screen Ma s ter Roll
may be wrong.
Check the s ide of the s creen ma s ter, and s et it correctly.
"Setting a New Screen Master Roll" on
page 20
Part of the original data
tran
s ferred onto the
imaged s creen i s mi ss -
ing.
The s ize of the original data may
exceed the image area.
The maxim u m s ize of the original data to be tran s -
ferred i s 11.69" (width)
×
3 1.50" (length) / 297 mm
(width)
×
800 mm (length). Any part o u t s ide thi s
image area i s not tran s ferred onto the s creen. In
addition, when the cover ratio i s large, original data
may not be tran s ferred onto the s creen d u e to over-
heating.
"Overheating and cooling down of the
Thermal Print Head" on page 42
The original data tran s -
ferred onto the imaged
s creen contain s a white
vertical line.
D us t may adhere to the Thermal Print
Head.
Clean the Thermal Print Head with a s oft cloth or ti s -
su e.
"Thermal Print Head" on page 59