Riso GOCCOPRO 100, Руководство пользователя

Страница: 15 / 94

Introduction
13
Do not us e the machine in any manner which violate s the law or infringe s on e s tab-
li s hed copyright s , even when making copie s for per s onal us e. Con su lt yo u r local
a u thoritie s for f u rther detail s . In general, us e di s cretion and common s en s e.
Frame type
Margin size on the
Top side
Margin size on the
End side
Method for margin size setting
Frame 1 - 5
2.4" / 60 mm or
more
2.4" / 60 mm or
more
The margin s ize i s a u tomatically calc u lated from the
frame length and the original s ize. Yo u cannot arbi-
trarily s et the margin s ize.
The frame length i s s et in C us tom Setting mode.
"How to Register a Frame" on page 50
MINIMUM
(Minim u m Margin)
2.4" / 60 mm fixed
0.6" to 1.2"
/ 15 mm to 3 0 mm
Red u ce the margin on the End s ide. The margin i s
s et in C us tom Setting mode.
"How to Register a Frame" on page 50
MANUAL
(Arbitrary Margin)
2.4" to 8.0"
/ 60 mm to 200 mm
0.6" to 8.0"
/ 15 mm to 200 mm
Select the Top s ide or the End s ide of the original
data us ing the <MANUAL> Key, and enter an arbi-
trary margin s ize us ing the 0 to 9 Key s .
When Making a Screen from a Landscape-oriented Origi-
nal:
Pay attention to the s ize of the original data. Any part o u t s ide
the image area will not be tran s ferred onto the s creen. If the
left or right end of the original i s o u t s ide the image area, take
the following action.
• Perform "Original
s ize entry" of the printer driver to regi s ter
an original s ize with the length and width of the original
interchanged in advance.
"Registering Original Size" on page 72
• Rotate the original by 90° us ing a f u nction of the application
s oftware before making a s creen.
Setting of the application Imaged screen Column
Materials Not to Be Printed