Riso 7150R, Руководство пользователя

Страница: 61 / 201

1-21
Basic Settings
1
ComColor Series User’s Guide 09
●
This setting is not available for paper sizes that
cannot be output to the face down offset
stapler, stacking tray or high capacity stacker.
(p. 2-44 "Configuring the Offset Output Setting"
in "Copy")
●
When using the face down offset stapler, you
cannot use this setting with stapling.
●
Normally, two-layer offsetting is used. When
this setting has been combined with "Staple",
three-layer offsetting is used.
●
When using the high capacity stacker, the
output position slides vertically.
●
Add cover
Specify this option to add a front and/or back cover.
Paper is added from a specified tray before or after
the data to be printed. Specify this option to use
colored paper or paper that differs from the pages
to be printed.
Select the [Add cover] check box and click [Details] to
display the [Details] dialog box. Select the [Put front
cover] and [Put back cover] check boxes, and select the
trays for the covers.
[Put front cover]
Insert a cover sheet before the first page.
[Put back cover]
Insert a cover sheet after the last page.
[Select front cover tray]/[Select back cover tray]
[Standard tray/High capacity feeder], [Feed tray1],
[Feed tray2], [Feed tray3]
●
Specify the trays loaded with paper to be used
for the covers.
●
When loading preprinted paper, it is
recommended that one set be printed to check
that the orientation matches that of the other
pages to be printed.
●
Booklet binding
Perform duplex printing for continuous multiple
pages to create a booklet with the paper folded in
two. The paper can also be bound in the middle
with staples.
Select the booklet binding method and click [Details] to
display the [Details] dialog box. Configure the [Separate
books], [Center margin], and [Booklet cover] settings.
The optional multifunction finisher is required to
use this setting.
Two-layer offsetting
Three-layer offsetting
Without stapling
(Multifunction finisher, face down offset stapler, high
capacity stacker)
With stapling
(Multifunction finisher)