Riso 7150R, Руководство пользователя

Страница: 127 / 201

2-49
Copying Functions
2
ComColor Series User’s Guide 09
■
Separate books
When you have selected [Paper folding] or [Fold +
Staple], some restrictions apply to the number of
sheets you can fold.
[Paper folding] creates a separate booklet every 5
sheets (20 pages), and [Fold + Staple], a booklet
every 15 sheets (60 pages).
When the number of pages exceeds these numbers
of sheets, one fold is made every number of sheets
indicated above and the sheets are output (creating a
separate booklet).
The layout order is different depending on whether
center binding or side binding is performed for the
separate stacks. Therefore, select [OFF] or [ON].
[OFF]
Data is imposed to create a book by opening,
layering, and then binding the sheets (in the center).
When [OFF] has been selected, the sheets are not
stapled even if [Fold + Staple] is selected.
[ON]
Data is imposed to create a book by folding, layering,
and then binding the sheets (on the side).
■
Center Margin and Auto Reduce
You can specify the center margin to the center of
folded sections to prevent the folded sections from
not being visible when folded in two. Specify the
center margin between 0 mm and 50 mm (1 15/16")
(in 1 mm units).
If a center margin you have specified would cause the
printed image not to fit on the sheet, you can
configure the image to be automatically reduced.
1
Press [Functions] on the copy
mode screen.
2
Press [Booklet].
The [Booklet] screen is displayed.
3
Select the booklet type.
When you have selected [Fold] or [Fold + Staple],
[Imposition] is set to [ON] automatically. To disable
Imposition, press [Imposition] and select [OFF].
4
Select the binding side.
5
Specify [Separate books].
p.11-20 + p.41-50
p.1-10 + p.51-60
p.21-30 + p.31-40
When "OFF" has been selected for [Separate books]
and [Paper folding] has been set for a 60-page original
p.21-40
p.1-20
p.41-60
When "ON" has been selected for [Separate books] and
[Paper folding] has been set for a 60-page original