27
Administrator Settings
ComColor Series Administrator’s Guide 08
IP Address Limiting
Specify computers that can access the machine.
<Description of settings>
• IP address
• Subnet mask
■
Setting with the operation panel
1
Press [IP address limiting] on the
[Admin. Settings] screen.
2
Select [Limited] and enter an IP
address and a subnet mask of the
computer to which access will be
granted.
●
When granting access to a specified computer
Specify the subnet mask of 255.255.255.255
for the IP address of the specified computer.
●
When granting access to multiple computers
Specify the subnet mask of 255.255.255.0 for
the IP address of each computer.
Example: When the IP address is set to
"192.168.0.100", a computer with an IP
address within the range from "192.168.0. 0" to
"192.168.0. 255" will be able to access the
machine. The ones with the other addresses
will not.
3
Press [OK].
Scanner Data Directory
Register a computer on a network as a scanned
data storage directory.
<Description of settings>
• Display name
Enter a name of a storage directory. The name
must be up to 20 characters long.
• Transfer protocol
Specify [FTP], [SMB] or [SMB (UNC)].
The following settings vary depending on the
specified protocol. An entry must be up to 256
characters.
Storage server IP address or URL, Storage
directory, Directory shared name, Storage
directory, Directory login name, Directory login
password
■
Setting with the operation panel
1
Press [Scanner data directory] on
the [Admin. Settings] screen.
2
Press [Add] to display a screen to
add a scanner storage directory.
3
Configure the settings.
When specifying an FTP server as the transfer
protocol
4
Press [OK].
