53
3.
Select the required
Partitions and then click the “Arm” button
.
Note:
You can
check/uncheck the ‘All Partitions” box to select/deselect all
Partitions by a single action.
The Group icon status indications (see above) also apply to the Groups Partitions
screen.
Note:
If after clicking the “Arm” button the selected Groups are not armed due to
Not Ready state, a new screen will appear indicating the Groups that are
Not Ready and the causes of the Not Ready states.
Detectors
The Security
→
Detectors screen lists all the devices that are part of the partitions
that the user has permission to view.
1.
Click the Detectors tab; the following screen is displayed.
Figure 49: Security
–
Devices Screen
There are three detector icon status indications, as follows:
•
Green:
Disarmed
•
Orange:
Part Arm
•
Red:
Full Arm
2.
Click any of the detectors to either
bypass the detector or mute its “Presence
Notification”, as
shown below:
