47
SECURITY
The security section of the RisControl describes all the operations and activities
relevant to the Security System.
As in the Overview Screen, an initiated alarm will appear as a floating button at
the bottom right of the Security Screen (except for the Security
→
Partitions screen).
Partitions
The Security
→
Partitions screen is the default screen that is displayed after the user
clicks
the “Security” option in the
main menu, as shown in the example below.
Note:
If the Overview Screen is empty (the user did not add any shortcuts buttons
to it), the Security
→
Partitions screen will be the default screen that is displayed
upon each unlocking of the RisControl.
Figure 43: Security - Partition Screen
The Grand Master can view and make changes to
the system’s partitions from
the
RisControl, independent of its masking. Other users, that have the required
permissions to these partitions, can make changes only to the partitions within
RisControl’s masked partitions.
The Partition state is indicated by the color, the image within the circle icon and the
label below the state.
