Risco LightSYS Plus, Руководство пользователя, Страница: 30 / 100

01/2022 Page 23 5IN2933
Deleting a Proximity Tags by its Tag
➢
To delete a Proximity tag by its tag:
1. Enter your Grand Master code, and then press OK.
2. Scroll to the Codes/Tags menu , and then press OK .
3. Scroll to Delete By Tag, and then press OK .
4. Within 10 seconds, hold the tag about 2 cm (1 inch) directly above the keypad's built-in
Proximity sensor; TAG DELETED displays and the keypad sounds a beep, indicating the
successful deletion.
NOTE: If a tag is not registered, if you position it over the keypad's Proximity sensor
TAG NOT DEFINED IN MEMORY displays.
Deleting My Own Proximity Tag
➢
To delete your own (non-Grand Master) Proximity tag:
1. Enter your user code, and then press OK .
2. Scroll to Codes/Tags, and then press OK .
3. Scroll to Delete My Tag, and then press OK.
4. At the "ARE YOU SURE?" prompt, use the Partial Arm button (see table in Keypad
Buttons
, page 12) to toggle to Y (yes) to delete it, or to N (no) to cancel the operation.
5. Press OK; if deleted, the keypad beeps and DELETED displays.