Rioned MULTI JET, Руководство пользователя

Страница: 30 / 61

01/18 30
Start spraying:
1. Open the HP valve ( 13 ).
2. Push button (Start spraying) on the control box or button
5 or on the radio remote control.
3. Push button (Throttle open) on the control box or button
4 or on the radio remote control.
4. Screw the high-pressure regulator wheel ( 15 ) upward on the high-
pressure regulator until the required working pressure is reached. The
adjusted pressure can be read from the pressure gauge ( 12 ) on the
machine when the spray gun is open.
5. Pull the trigger of the spray gun.
Stop spraying
Release the trigger of the spray gun.
5.8 Stop working
1. Press button (Throttle close) or button 4 or on
the radio remote control.
2. Press button (HP pump off) or button 6 or on the
radio remote control.
3. Close the HP valve ( 13 ).
5.9 Spray gun with NW 5 hose
Instead of the spray lance gun, you can also mount a NW5 hose with small noz-
zle onto the spray gun. This set can be used for unclogging small pipes. The
water supply can be used for unclogging via the gun. In this way you can pre-