manualshive.com logo in svg

Rioned flexJET, Руководство пользователя

Поделиться
Скачать
Rioned flexJET Скачать руководство пользователя страница 22

01/18

18

5.2

Check before departure

Before you drive away with the vehicle, check the following:

1.

Are the supports at its full height and locked? (Option)

2.

Is the high-pressure hose (

4

) been inserted into the hose holder and 

secured with the securing pin.

3.

Is the high-pressure hose reel (

4

) locked by means of the reel lock or 

is the hydraulic reel control handle been put into position “O” (fixed).

4.

Is the supply hose (

5

) been connected to the GK coupling.

5.

Is the supply hose reel locked by means of the reel lock.

6.

Is the tyre tension of the trailer enough.

7.

Do the brakes function adequately (only ).

8.

Empty the water tank.

9.

In case of frost, flush pipes with antifreeze!

Warning!

Never drive faster than the maximum speed for trailers!

The trailer is now ready for transport.

5.3

Unhitching and setting up

1.

Place the trailer in position.

2.

Block, by use on a slope, the wheels with a wedge.

3.

Lower the support completely and secure in place (option).

4.

Disconnect the plug for the rear lights. 

5.

Release the safety cable from the eye.

6.

Unhitch the trailer from the car. Pull up the handle on the tow bar and 

then slant towards the front.

7.

Lower the two support legs and lock them by turning the clamping 

bolts. See to it that the trailer is more or less level.

8.

Pull the hand brake of the trailer and lower the nose wheel somewhat 

in order to increase the stability of the trailer. 

9.

Mark the working area according the local regulations.

Содержание flexJET















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды