Rioned flexJET, Руководство пользователя

Страница: 21 / 78

01/18 17
5 CONTROL
If you control, maintain or inspect the machine, you must
have the right qualifications for this job. If you do not have
the necessarily knowledge, you may not use the machine.
Further, you must convince yourself that you understand
this manual thoroughly.
5.1 Hitching up the trailer
If you want to drive with the trailer, the trailer must be connected to your ve-
hicle.
Proceed as follows:
1. Pull the safety break handle up ( Illustration 5.1.1 E ).
2. Place the tow bar of the trailer onto the ball of the hitch on your vehi-
cle.
3. Check whether the trailer is more or less horizontal. If it is not, the
hitch will not be at the required height (heart cone between 38 and 42
cm from the ground) and your car will not be able to tow the trailer.
4. If the hitch on the car is at the required height, push the safety lock
( Illustration 5.1.1 B ) downwards.
5. Check whether the pin ( Illustration 5.1.1 A ) for the safety lock is in be-
tween the marks.
6. Attach the safety cable to the eye which has been specially installed
for this purpose. This cable should not be pulled tightly or become
caught in any part.
7. Put the plug for the trailer into the socket on the car. Check whether
the rear lights function properly.
8. Raise the support completely ( Illustration 5.1.1 C ) and secure it by
turning the bolt ( Illustration 5.1.1 D ); now the tow bar of the trailer
rests on the ball and hitch on the car.
Illustration 5.1.1
B
A
D
C
E