Rioned CityJet, Руководство пользователя

Страница: 37 / 98

OPERATION: STANDARD FUNCTIONS
37
4 Operation: standard functions
4.1 Introduction
In this chapter we first describe the checks you must carry out before departure and the preparations
required at the workplace. Then the different ways to start the engine are explained.
Next the work will be discussed: unblocking a sewer, properly handling the high pressure hose and
cleaning a wall, terrace or floor.
4.2 Checks before departure
ALWAYS check the following before you drive off with your vehicle:
>
Is the high pressure hose completely rolled up?
> Is the high pressure reel secured in the hose holder?
> Is the high pressure hose secured in the hose holder with the safety clip?
> Is the filling hose completely rolled up?
> Is the end of the filling hose secured to the frame?
> Is the filling reel fixed by means of the reel latch?
> Is the swivel arm fully retracted and secured?
> Is the hose guide secured?
Check fluids:
>
Check the oil level of the engine with the dipstick.
> Top up as required.
> Check that there is enough fuel in the fuel tank.
> Top up the tank if necessary.