IBF - Slimfire 25
- 8 -
Issue 5 - ©Rinnai
Flueing in a fireplace using a Flexliner flueing kit.
Installation with a flue liner is required when a chimney
will no longer substitute as a flue, such as when leakage
is found during the smoke test, or where the chimney
height is inadequate. Refer to Rinnai Flueing
Instructions.
Flexliner Slimfire Flue Kit
Order code: FLEXLINER03
Contains:
- 1 x Chimney Cowl & Adaptor
- 1 x Chimney Plate
- 1 x Flexible Chimney Liner
(extendable to 5.0 metres)
- 1 x Flue Adaptor
- 1 x Appliance Adaptor
If the chimney height excedes 5.0 metres, use Voumard
900 x 100 snap-lock flue
(code: 72-0583) to extend to the desired length.
Chimney Cowl
Slimfire
Heater
Chimney Plate
Adaptor
Appliance Adaptor
Flexable
Chimney
Liner
Note: Ensure maximum
vertical rise before any
change of direction and
avoid sharp bends as this
will restrict the chimneys
ability to draw.
Fitting of the Appliance Adaptor
to the heater
