Rinnai Australia
42
Sapphire Operation & Installation Manual
COMPLETING HEATER INSTALLATION
PREPARING FOR COMMISSIONING
Step 1.
Removing the Burner Box Glass
Loosen but do not remove the two retaining screws
for the bottom burner box glass clamp
. While supporting
the burner box glass panel in place, completely unscrew and remove the two retaining screws
and the top
burner box glass clamp
. Then lift burner box glass panel
away and place it safely aside where it can not get
damaged.
Step 2.
Unpacking Log Set & Granules Satchel
There are two items shipped inside the burner box of the heater engine, these are the log set
and the burner
granules
. These items are now accessible for removal.
Carefully unpack the five logs
from the packaging material
and inspect each log for damage, temporarily
return logs to the packaging
for safe keeping. After inspection place the logs and the burner granules satchel
safely aside where they can not get damaged. If
ANY
damage is evident on the logs
DO NOT
continue with
installation and contact your supplier for advice.
The satchel containing the burner granules
is
taped to the outside of the foam packing that
contains the log set. Ensure that you locate and remove the satchel before discarding the
packaging material.
D
E
C
A
F
G
H
B
A
B
D
E
C
G
H
IMPORTANT
H
G
F
F
H
