Rinnai Australia
13
Sapphire Operation & Installation Manual
REMOTE / THERMOSTATIC CONTROLLED OPERATION
WIRELESS CONTROLLER / THERMOSTAT
The wireless controller is designed to be wall mounted on a bracket, (bracket supplied with the controller), within
20m of the heater.
The controller houses the thermostat which senses room temperature and communicates back to the Sapphire
heater via Radio Frequency.
The ideal position for the controller is:
• Away from possible drafts in the room.
• Away from direct sunlight.
• Suitable distance away from the heater
(not exceeding 20 metres).
• Ideally 1.5 m from the floor
(approximately at chest height).
Controller Specifications
Battery:
2 x AA batteries.
Battery Life:
Approximately 12 months.
Dimensions:
Height: 140 mm, Width: 80 mm, Depth: 20 mm.
Additional information about Remote Thermostat Control Buttons
Transmit Indicator
Indicates the thermostat is transmitting to the receiver, the symbol
with appear on the LCD for 1 second.
Battery Indicator
This symbol will flash when batteries need replacing. The thermostat
will remain functional for approximately 5 days before shutting ‘off’.
Re-programming of the controller will be required after battery
replacement.
Temperature Display
Displays current temperature. °C is the default but °F is available.
The temperature range is 7°C - 32°C (45°F - 90°F).
Room Indicator or Set Indicator
When the thermostat is ‘ON’ the programmed (set) temperature and
the room temperature will be displayed. When the Flame mode is
‘ON’ the Flame setting F7 to F1 will be displayed.
PWR + OK
Switches the thermostat ‘ON’ and ‘OFF’. If thermostat is ‘OFF’,
pressing and releasing the
‘PWR’
+
‘OK’
button will turn the
thermostat on to the most recently selected working mode.
T (Time)
Initiates the time and day of week programming, press and hold for
2 seconds.
UP, DOWN & OK
‘UP’
increase hours, minutes, day or temperature
‘OK’
, accepts the
current function and advances to the next function,
‘DOWN’,
decrease hours, minutes, day or temperature.
P (Program)
Initiates the programming mode, press and hold for 2 seconds.
A/M
PWR
T
P
DOWN
UP
OK
A/M
T
P
DOWN
UP
A/M
PWR
T
P
DOWN
UP
OK
A/M
PWR
OK
P
DOWN
UP
A/M
PWR
T
P
DOWN
UP
OK
A/M
PWR
T
P
A/M
PWR
T
P
DOWN
UP
OK
A/M
PWR
OK
T
DOWN
UP
