background image

—  Do not store or use gasoline or other flammable vapors and liquids in 

the vicinity of this or any other appliance. 

 
—  WHAT TO DO IF YOU SMELL GAS 
 

• 

Do not try to light any appliance. 

• 

Do not touch any electrical switch; do not use any phone in your 
building. 

• 

Immediately call your gas supplier from a neighbor’s phone.  Follow 
the gas supplier’s instructions. 

• 

If you cannot reach your gas supplier, call the fire department. 

 
—  Installation and service must be performed by a qualified installer, 

service agency or the gas supplier. 

WARNING: If the information in these instructions are not followed 
exactly, a fire or explosion may result causing property damage, 
personal injury or loss of life. 

Owner’s Operation and Installation Manual for the 

 

RHFE-750ETRA 

Direct Vent Fireplace 

INSTALLER:   Leave 
this manual with the 
appliance. 
 
CONSUMER:  Retain 
this manual for future 
reference. 

Table of Contents ........... 2 
Safety Information .......... 2 
Operating Instructions .... 6 
Care and Maintenance ... 11 
Fault Codes .................... 14 
Installation Instructions .. 15 
Consumer Support ......... 38 

Содержание RHFE-750ETRA









































Отзывы: