background image

Rinnai 15 

Split AC IM

FINAL CHECKLIST

IMPORTANT

The checklist is ONLY to be completed by an Authorised Person. 

Check Item

What can happen if not checked

Is the indoor unit installed securely?

Falling, vibration, noise

Has an inspection been made to check for gas leakage?

No cooling or heating

Has all thermal insulation been completed (vapour pipes, 

liquid pipes, indoor portions of the drain hose extension)?

Condensation

Is the drainage secure?

Water leakage

Are the electric wires installed correctly?

No cooling or heating, may cause electrical shock or 

electrical fire.

Is the wiring in accordance within the specifications?

Operation failure, electrical fire

Are all inlets / outlets of the indoor and outdoor units free of 

any obstructions?

No cooling or heating

Are the stop valves open?

No cooling or heating

Are the pipes designed for use with R32?

Pipe or pipe connection leakage

Has a leak test been carried out for the pipe connections?

Pipe connection leakage

Has air purging been carried out?

No cooling or heating

Has the appliance been tested for correct operation? 

No cooling or heating

Is the end user fully aware of the operating procedure?

Incorrect operation

If you have answered no to any of the above, you must check and correct before appliance hand-over to customer.

INSTALLATION

Содержание HINRJ25B

















Отзывы: