Rinnai
8
Split AC OM
SLEEP OPERATION
NOTE
This function can only be activated via the use of the Remote Control.
For a more detailed explanation of your air conditioners advanced functionality, please refer to
the Remote Control Manual.
Sleep mode is not available in FAN or DRY modes.
The SLEEP function allows the decrease of energy usage while you are asleep, as you do not require the same
temperature settings while asleep to remain comfortable�
1� Press the "ON/OFF" button to turn on appliance�
2� Set the desired mode, temperature and fan speeds�
3� Press the SLEEP button when you are ready to go to sleep�
For Cooling:
After 1 hour has elapsed the unit will increase the temperature by 1°C above the set temperature, and will
then increase the temperature by an additional 1°C after a further hour has elapsed�
The air conditioner will then hold the new temperature setting for 7 hours, after which the air conditioner will
then turn off automatically�
For Heating:
After 1 hour has elapsed the unit will decrease the temperature by 1°C below the set temperature, and will
then decrease the temperature by an additional 1°C after a further hour has elapsed�
The air conditioner will then hold the new temperature setting for 7 hours, after which the air conditioner will
then turn off automatically�
4� Pressing the "SLEEP" button again will cancel sleep function�
POWER INTERRUPTION AUTOMATIC RESTART
Should a power outage occur while the appliance is operating, when the power is restored the system will restart
automatically using the same settings as those that were set before the power outage�
NOTE
After power restoration, the automatic restart cycle will take approximately 5 minutes. DO NOT
adjust setting during the restart cycle period.
Saving energy during sleep
1hr
1hr
In Cooling Mode
+ 1°C
+ 1°C
- 1°C
- 1°C
In Heating Mode
Set temperature and
operation mode, then
select sleep operation
After 7 Hours the air
conditioner turns off
automatically
BASIC OPERATION
