background image

Important

Appliance must be installed with a Rinnai approved flue system.

This appliance must be installed in accordance with:

 

-

Manufacturer’s installation instructions

 

-

AS/NZS 5601 Gas Installations

 

-

AS/NZS 5263 Gas appliances standards

For use with Natural Gas or Universal LPG as indicated on the 

appliance.

Appliance must be installed, commissioned and serviced by an 

authorised person, being in New Zealand a licensed gasfitter.

Warning

Improper installation, adjustment, alteration, service and 

maintenance can cause property damage, personal injury or loss 

of life.

For more information about buying, using, and servicing of Rinnai 

appliances call: 0800 RINNAI (0800 746 624).

Rinnai New Zealand Limited

105 Pavilion Drive, Mangere, Auckland

PO Box 53177, Auckland Airport, Auckland 2150

Phone: 

(09) 257-3800

Fax:   

(09) 257-3899

Email: 

[email protected]

Web:   

rinnai.co.nz

 

 

youtube.com/rinnainz

 

 

facebook.com/rinnainz

When completing the installation it is ideal to have the homeowner present to test the Wi-Fi 

connectivity and correct operation of the fire.

Installer please note

Содержание Evolve 1252 Series





























Отзывы: