Power
Source
Mains powered equipment from a 12v source
User Manual
12v DC to 230v AC Power Source
150 & 300 Watts
Distributed by:
Ring Automotive Gelderd Road, Leeds LS12 6NB
Tel: +44 (0)113 276 7676 Fax: +44 (0)113 231 0266
Email: [email protected]
4
Specifications
PowerSource Model
RINV150
RINV300
Max. Continuous power (Watts)
150
330
Peak Power (Watts) 0.01 Seconds
300
600
No load current draw (AMPS)
<0.15
<0.25
Waveform
Modified Sine
Modified Sine
Input Voltage Range
10 – 15 Volts DC
10 – 15 Volts DC
AC Socket
3 Pin Mains
3 Pin Mains
Fuse
20 amp
40 amp
Weight (kgs)
0.8
1.1
Dimensions (mm)
140 x 137 x 52
203 x 137 x 52
Troubleshooting Guide
Symptom
AC appliance will not operate;
the audible alarm is sounding.
AC appliance will not operate;
the audible alarm is not
sounding.
Above sympton when using the
cigarette lighter plug on the
RINV300
Run time is less than expected
Possible causes
1. Battery has discharged to 10v.
2. The inverter has overheated. This
could be due to poor ventilation.
3. Poor battery condition
1. Inverter is overloaded.
2. Internal fuses have blown.
3. fuse in cigarette lighter plug
has blown.
4. Vehicle fuse has blown as the
maximum wattage using the
cigarette lighter plug is 180 watts.
1. Internal battery is not fully
charged.
2. AC appliance power
consumption is higher than
expected.
Possible solution
Turn off the inverter on/off switch
and recharge the battery.
Turn off the inverter and allow to
cool for 10 mins.
Replace battery.
Reduce load, not exceeding
maximum rating.
Fuse replacement (qualified
electrician only).
Replace fuse in cigarette lighter
plug - 15 amp.
Replace vehicle fuse and ensure if
using cigarette lighter plug the
wattage does not exceed 180
watts. Above this connect directly
to the vehicle battery.
Recharge the battery.
Check AC appliance wattage
rating is within scope of inverter.
For further assistance: Technical Helpline: +44 (0)113 276 7244
