RL35HWV40/GB/N
O
7768/16279
2-1
Safety information
2
Safety information
2.1
General
The design of this device conforms to the current state of
engineering and is safe to operate.
The individual modules and the completedevice are subject to
continual inspection by our quality assurance department.
2.2
Intended purpose
This device is intended exclusively for the ultrasonic welding of
suitable plastics. Any other use is regarded as inconsistent with
the intended purpose, and is undertaken at the user's own risk.
The manufacturer is not liable for any resultant damage.
Intended for industrial use.
2.3
Special points to note
Before you start up the device for the first time, read this operation
manual carefully.
Being badly informed about how to operate and look after the
device can result in damage.
Always keep the operating manual handy at the site of the device.
Do not perform any modifications, extensions or conversions on
the device which might endanger safety without the supplier's
consent.
Do not alter the programming (software) of programmable control
systems.
2.4
Choosing staff
Work on the electrical installations of the device may only be
performed by an electrical specialist or instructed staff under the
management and supervision of an electrical specialist, accor-
ding to electrical engineering standards.