Rimage DLN5200 Скачать руководство пользователя

Страница: 1 / 4

110769_H

Rimage DLN5200

™

Setup and Installation

Before you begin:

This document is intended for people who are familiar with hardware setup, software installation, and Windows operating systems.

If you do not understand the procedures in this document, ask your computer technician for help.

Set up your DLN5200.

Tape

a. Remove the

tape

from the front cover.

b. Remove the

front

cover

c. Remove the

tape

from

the transfer slides inside

the autoloader.

d. Remove the

tape

from the supply bin.

e. Remove the

tape

from the printer

mounting plate.

Содержание DLN5200

Страница 1: ...perating systems If you do not understand the procedures in this document ask your computer technician for help Set up your DLN5200 1 Tape Tape Tape Tape Tape a Remove the tape from the front cover b...

Страница 2: ...slide into the slots on the printer plate Printer plate Slots for feet Connect the printer cables 3 a Connect the short power cord from the DLN5200 to the printer b Connect the USB cable from the aut...

Страница 3: ...tlet Install the front cover 6 5 c Connect the network cable to the embedded PC Important Do not power on the DLN5200 until you are instructed to do so Connect a monitor mouse and keyboard optional a...

Страница 4: ...minstrator Password password 8 Activate your Rimage Software You have 30 days to activate your Rimage software Until your software is activated you will be prompted to activate your software each time...