Rimage Allegro 20, Руководство по обслуживанию

Страница: 44 / 45

Rimage Corporation Page 44
Allegro 20 Disc Publishing System Service Manual
Section 25 - Troubleshooting
Symptoms During Initialization Possible Solution
No carrier or print tray (solenoid clicks and
picker moves twice)
Blinking control panel
Carrier drive motor (see Carrier Drive
Motor )
No print tray (carrier moves, solenoid clicks
and picker moves)
Feed drive motor (see Feed Drive Motor )
No carrier or print tray (solenoid clicks and
picker moves once)
Blinking control panel
Encoder wheel sensor (see Encoder Wheel
Sensor )
Carrier slams quickly to right
Encoder strip (see Encoder Strip )
No carrier, print tray, solenoid or picker
Blinking control panel
Picker interface board or flex cable (see
Picker Interface Board & Flex Cable )
Print shaft continues spinning backwards for
a few moments after print tray movement
Blinking control panel
Tray sensor on mainboard (see Mainboard )
No carrier, print tray or picker (solenoid
clicks)
Blinking control panel
Lead screw (see Lead Screw )
No carrier, print tray or solenoid (picker
moves once)
Blinking control panel
Picker arm board or flex cable (see Picker
Arm Board & Sensor Flag Bracket )
Solenoid does not click (carrier, print tray and
picker move)
Solenoid (see Solenoid )