Riken Keiki PT9E-0137, Руководство по эксплуатации

Страница: 13 / 19

9 RP-2009 Pump for the GX-2009
If an optional hose and probe are used instead of the rubber sample
nipple, hold the probe in the area to be sampled. To sample from a
well or other similar sample area, the hose and probe may be
lowered into the sample area. Allow the pump unit to sample for 90
seconds for a full response on the
GX ‐ 2009.
NOTE: Although the RP ‐ 2009 pump does have a hydrophobic filter
built in, the optional probe does not have a hydrophobic filter.
It has a dust filter only.
10. Monitor the GX ‐ 2009 display for the gas readings and take
appropriate action if gas alarms occur.
11. When sampling is complete, go to a fresh air area and turn off the
pump unit.
12. Remove the RP ‐ 2009 / GX ‐ 2009 assembly from your belt or
clothing.
13. Turn off the RP ‐ 2009 by pressing and holding the POWER button
until the RP ‐ 2009 sounds a long beep and the power indicator
LED turns off, about 3 seconds.
14. Turn off the GX ‐ 2009.