background image

PT1E-0930 

35

 

12.WARRANTY 

 

RIKEN KEIKI STANDARD WARRANTY   
FOR FIXED GAS DETECTION INSTRUMENTS 

 

RIKEN KEIKI CO., LTD. warrants gas alarm equipment manufactured and sold by us   
to be free from defects in materials and workmanship for a period of one year from   
date of shipment form RIKEN KEIKI CO., LTD.    Any parts found defective within that   
period will be repaired or replaced, at our option, free of charge, F.O.B. factory. 
This warranty does not apply to those items which by their nature are subject to 
deterioration or consumption in normal service, and which must be cleaned, repaired   
or replaced on a routine basis. 

 

The alarm contact output specified in this system is provide for the use of buzzer and 
lamp to be communicated to the other external place than the system installed. 
But to secure the safety, there may be the case that the following interlocking 
performance shall be made by use of alarm contact output from customers. 

 

1. Stop the gas supply. 
2. Stop the action of system which uses gas. 
3. Let the cervices exhaust fan operated. 
4. Let stop the work of the staffs in the area by the auto paging system and escaped   

to the outside from there 

5. Let the alarm transmitted to a remote place by auto communication system. 
6. Let the alarm transmitted by the lamp and buzzer to this area and that area. 
7. Others. 

 
But, we do not assume the responsibility for the secondary damage, which may be 
generated by this interlocking action because it is not in our scope of recognition. 
Then, we cannot strike the sales contract or the manufacture in the scope to reimburse   
this secondary damage. 
 
Warranty is voided by abuse including rough handling, mechanical damage, operation, 
alteration, or repair procedures not in accordance with instruction manual. 
This warranty indicates the full extent of our liability, and we are not responsible for 
removal or replacement cost, local repair costs, transportation cost, or contingent expenses 
incurred without our prior approval. 
     
This warranty covers instruments and parts sold (to users) only by authorized distributors, 
dealers and representatives as appointed RIKEN KEIKI CO., LTD.. 
 
We do not assume the indemnification for any accident or damage caused by the operation   
of this gas monitor and our warranty is limited to the replacement of parts or our complete   
goods. 

Содержание GP-591





































Отзывы: