Rigol DSA1000A Series, Руководство по программированию

Страница: 9 / 174

Chapter 1 Overview
RIGOL
Programming Guide for DSA1000A series 1-3
SCPI Commands Introduction
SCPI (Standard Commands for Programmable Instrument) is based on IEEE 488.2 and
usually divided into two sections: Common Commands and Control Commands
defined for SCPI Instruments.
A common command is defined by IEEE 488.2 and must be executed as well as both
the syntax and semanteme of it follows the application of
IEEE 488.2. The common
command works independently of measurement and is used for controlling the reset,
self-test and status operations.
For more detalis, refer to “ IEEE 488.2 ”.
A Control Command defined for SCPI Instrument is used to measure and read data,
control the state of a function or mode and so on, involving all measurement functions
and some specific functional functions.