FAQ
Instrument Solution – FAQ
Solution Title
Troubleshooting DSA1000 LAN Connections
Date:
01.24.2012
Solution:
Communicating over LAN to the DSA series is straightforward. Here are
some things to try if you are having difficulty:
1.
Make sure Ethernet cable is connected properly and that the switch/hubs in
the network configuration are operating properly.
•
The green LED on the back of the DSA should display a solid
illumination when the connection is made.
•
The yellow LED on the back of the DSA should blink when data is sent
and received.
2.
The DSA defaults to communicate over USB. To configure the instrument
for Ethernet, follow these steps:
•
Press System > I/O Setting > Remote I/O and toggle to LAN
