manualshive.com logo in svg

Rigol DS70000 Series, Руководство пользователя, Страница: 10 / 43

Поделиться
Скачать
Rigol DS70000 Series Скачать руководство пользователя страница 10

2

Specification

This chapter lists the technical specifications of the DS70000 series oscilloscope.

The maximum sample rate of DS70000 series digital oscilloscope is 20 GSa/s, the
highest bandwidth is 5 GHz. RIGOL's brand new UltraVison III technical platform
guarantees the specifications to reach the advanced level in the industry, with the
capture rate up to 1,000,000 wfms/s, 2 Gpts memory depth, and 8 bit ~ 16 bit
adjustable resolution.

To meet specifications, these conditions must be met:
•

The instrument must have been calibrated in an ambient temperature between
18°C and 28°C.

•

The instrument must be operating within the environmental limits (For the
specific environment requirements, refer to DS70000 Datasheet).

•

The instrument must be powered from a source that meets the requirement for
the power supply (For the power specifications, refer to DS70000 Datasheet).

•

The instrument must have been operating continuously for at least 30 minutes
within the specified operating temperature range.

The following table shows some of the technical specifications of DS70504 and
DS70304. For other technical specifications of DS70000, please refer to 

DS70000

Datasheet.

Table 2.1 Specifications

Overview of the DS70000 Series Technical Specifications

Model

DS70504

DS70304

No. of Input Channels

4 analog channel inputs

1 EXT channel input

Input Coupling

DC, AC, or GND

Input Impedance

1 MΩ ± 1%, 50 Ω ± 2.5%

Analog bandwidth (50 Ω, -3 dB)

[1]

5 GHz

3 GHz

Analog bandwidth (1 MΩ, -3 dB) 500 MHz

Bandwidth Limit

1 MΩ

20 MHz, 250 MHz

50 Ω

20 MHz, 250 MHz, 1
GHz or 2 GHz

 Specification

DS70000 Performance Verification

4

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Содержание DS70000 Series












































Отзывы:

Нет отзывов