Rigol DS2000 Series, Руководство по обслуживанию, Страница: 11 / 24

Chapter 1 Disassemble and Assemble RIGOL
DS2000 Service Guide
1-3
Disassemble the Rear Cover
Figure 1-2 Disassemble the Rear Cover
Part Explanations:
①
2 screws (#PM3*10 torx pan head screw; one on each side) at the handle groove.
②
2 screws (#PM/SW/FW3*8 torx pan head screw assembly; one on the inner side of
the left and right supporting legs respectively) at the supporting legs at the bottom of
the cover.
Dsiassemble Steps:
1.
Remove the 2 screws (
①
) at the handle groove using the screw driver (T10).
2. Remove the 2 screws (
②
) at the supporting legs at the bottom using the screw
driver (T10).
3. Take off the rear cover gently.
Rear
Cover
①
②
②