RigExpert AA-230 ZOOM
7.
Software manual
20/03/2019
(Top)
Settings
1.
Connect your analyzer to the PC as described in section 1 of this manual. Make
sure the analyzer
is turned on and is in the “ PC mode ” (the AA
-230 ZOOM is
already in the “ PC mode ” once turned on).
2.
Run AntScope. Under Windows, the program will automatically detect the virtual
COM port number as well as the analyzer type. For Mac OS and Linux, select
serial device name and analyzer type in the Configure menu.
Menu General
Here you tick everything that applies for your use.
Also select the ITU zone where you are located.
