How do I use Multi-Flo in Remote
Control mode on Med-eBase?
To use the remote control mode the user will need to install the Gadget
Serial V2.4 Driver. The Gadget serial driver is available at rigelmedical.com in
the download section. To install the gadget serial driver the Multi-Flo needs
to be turned on and connected to the PC using the USB serial cable.
Equipment required:
- Multi-Flo
- PC running Med-eBase V2.4 or higher
- Gadget serial driver install files
- USB Serial cable or memory stick
1) On the Multi-Flo menu scroll down and select remote control mode. The
Multi-Flo will then try to connect with the PC.
2) The PC will attempt to download the install drivers for the gadget serial.
As the driver is located on the PC and cannot be found on the internet this
step is not required. Click on the icon when it appears as seen below.
3) Select “skip obtaining driver software” which is blue and underlined to
stop widows looking for driver as the Rigel device won’t be able to connect
to the PC while the computer is performing this task. Select yes on the
driver software installation screen to skip the driver update.
